A Mercedes heavy transport truck carrying components for a wind turbine.

Mercedes-Benz Atego 1725 4x4 Passenger Vehicles for Game Reserve Transport in Botswana

Moving guests, staff or research teams through a Botswana reserve is a specific job, and a standard bus cannot do it. The sand of the Kalahari, the black cotton soil of the Delta in the wet season, water crossings, mopane scrub and the distances between a Maun airstrip and a camp all rule out anything built for a tarred road. At the same time, the vehicle carries people, which means it has to meet passenger vehicle requirements rather than truck requirements.


The Mercedes-Benz Atego 1725 4x4 is one of the few chassis that answers both. At Schaften Automotive we supply it, have the passenger body built by specialised European bodybuilders, and arrange the certification, documentation and shipping. From our headquarters in the Netherlands, we deliver to operators, lodges, reserves and conservation organisations in Botswana, in right-hand drive, from A to Z.

Mercedes-Benz Arocs 8x4 with truck-mounted concrete boom pump

More Than a Supplier: Your Sparring Partner from A to Z

A vehicle for reserve work has to satisfy several things at once, and they pull against each other. It needs ground clearance and traction for deep sand and mud, which raises the centre of gravity. It needs a high seating position for game viewing, which raises it further. It needs to be stable on a track that is rutted and cambered. It needs to carry a meaningful number of people safely, and it needs to do that while meeting the requirements that apply to a passenger vehicle rather than a truck.


Then there is the environment. Fine dust gets into everything in the dry season, and the wet season turns tracks into something a two-wheel-drive vehicle has no business being on. Heat is constant. Distances are long and workshops are few, so a vehicle that cannot be maintained by your own mechanic at camp is a vehicle that spends time on a low-bed going to Maun or Gaborone.


That is why we don’t start from a catalogue. We start by understanding the operation: how many people you carry and who they are, the tracks and conditions you work in across the seasons, whether the vehicle is for game viewing, transfers, staff or a mix, what your own workshop can maintain, and what your regulator and your insurer require. Based on that, we advise you on chassis specification and body design. Once you have decided, we take care of the rest: bodybuilding, certification, export documentation, customs support and shipping. You have one point of contact throughout.

Why the Atego 1725 4x4

The Atego 1725 4x4 sits in a useful place. It is a medium-duty all-wheel-drive chassis, lighter and more manoeuvrable than a heavy off-road truck but with far more capability and payload than a converted pickup or minibus.

  • All-wheel drive with reduction gearing and differential locks, which is what gets a loaded vehicle through deep sand and out of a wet crossing.
  • Ground clearance and approach and departure angles suited to rutted tracks, dongas and informal crossings.
  • A payload and body length that let you build a genuine passenger body with proper seating, storage and a roof, rather than squeezing people onto a platform.
  • A cab and drivetrain that are widely known in southern Africa, which matters a great deal for parts and for mechanics who have seen the vehicle before.
  • Manoeuvrability on narrow tracks and around camp, where a longer wheelbase simply will not turn.


We will also be straightforward with you. If you carry six guests at a time on short game drives, a purpose-built game viewer on a lighter 4x4 chassis is the better and cheaper answer, and we will say so. The Atego 1725 4x4 earns its place when you carry a larger group, over longer distances, with luggage, in conditions where a lighter vehicle struggles.

food-man-33-400-6x6-drinker-water-project-africa

The Passenger Body

This is where the vehicle is made or ruined, and where most of our work goes.

Configuration Options

  • Open-sided game viewing bodies with tiered seating, a canopy or roll-back roof, grab rails and a raised floor for sightlines.
  • Closed passenger bodies with air conditioning, dust sealing and tinted glazing, for transfers between airstrips, camps and lodges.
  • Convertible configurations with removable or drop-down sides, so one vehicle covers game drives and transfers.
  • Combination bodies with a passenger section and a separate luggage, cool box or equipment compartment, which on a long transfer is what keeps dust and noise away from guests.
  • Staff and crew transport bodies, which are usually simpler, more robust and specified for daily use rather than guest comfort.
  • Research and conservation configurations, including equipment mounting, storage, long-range fuel and water, and observation positions.

How We Specify It

  • Seating layout and capacity, with proper seats, anchorages and belts to the applicable standard rather than benches bolted to a floor.
  • Centre of gravity and stability, which with tiered seating on a 4x4 chassis is the single most important design question and the one most often got wrong.
  • Access, with steps and handrails that work for guests of all ages, which on a high-clearance chassis takes real thought.
  • Dust management, including sealing, positive pressure where the body is closed, and sensible placement of openings.
  • Heat and sun, with roof insulation, ventilation and shading, or air conditioning sized for the ambient temperatures you actually work in.
  • Storage, for luggage, cool boxes, recovery gear, water, radio equipment and first aid.
  • Visibility and the experience itself, because a game viewing body that seats people badly is a body that costs you reviews.
  • Corrosion and durability, for dust, humidity in the Delta and years of daily use on rough tracks.
schaften-3x-man-trucks-in-stock

Vehicle Category, Certification and Registration

This is the part that catches people out, so we want to be clear about it.


An Atego 1725 4x4 leaves the factory as a goods vehicle chassis. The moment you put a passenger body on it, you are creating a vehicle in a different category, and different requirements apply: seating and restraint standards, occupant protection, emergency exits, access and, in Botswana, the roadworthiness and permit requirements that apply to passenger carrying vehicles, particularly where paying passengers are involved.


What that means in practice is that the body cannot be an afterthought. It has to be designed and documented to be approvable, and the documentation has to travel with the vehicle. We work with European bodybuilders who build passenger bodies to a certifiable standard and who produce the technical documentation that goes with it. We then coordinate with you and your agent in Botswana on what the local authorities will want to see.


We would much rather have this conversation before anything is built than explain it to you at a roadworthy test.

Right-Hand Drive

Botswana drives on the left and right-hand-drive vehicles are the norm. We source right-hand-drive Atego chassis through our European network for any vehicle that will be registered and used on the public road. Mercedes-Benz builds the Atego in right-hand drive, so this is a sourcing question rather than an obstacle. If a vehicle will work exclusively inside a private reserve and never on a public road, the requirements can be different, and we check that with you and your agent before you commit.

oilgas-man-18-250-4x4-service-truck-1
schaften-3x-man-trucks-in-stock

Specified for Botswana

  • Deep sand: tyre choice, gearing, tyre pressure management provision and a specification that lets a loaded vehicle keep momentum rather than dig in.
  • Wet season mud and water: wading capability, raised air intake and breathers, protected underbody components and sealed electrics.
  • Dust: multi-stage air filtration with pre-cleaners, and body sealing that keeps the dry season out of the passenger compartment.
  • Heat: cooling capacity for sustained low-speed work in high ambient temperatures, where airflow is limited.
  • Distance: fuel capacity, and where appropriate water and spares capacity, for a vehicle operating far from a workshop.
  • Serviceability: a specification your own mechanic at camp can maintain, with parts available through the southern African network.
  • Recovery provision: because at some point the vehicle will need to be recovered or will need to recover something else.

How We Arrange Your Purchase from A to Z

Step 1: Consultation

We discuss who you carry and how many, the tracks and seasons you operate in, whether the vehicle is for game viewing, transfers, staff or a mix, your workshop capacity, and the permit and roadworthiness requirements that apply to your operation.

Step 2: Chassis and Body Design

We source a suitable right-hand-drive Atego 1725 4x4 through our European network and work out the body design with our bodybuilders, including seating layout, centre of gravity, access and dust management. You receive a clear proposal with specifications, drawings where relevant, pricing and planning.

Step 3: Bodybuilding and Certification

The body is built by a specialised European bodybuilder to a certifiable passenger vehicle standard, following the chassis manufacturer’s guidelines, with the technical documentation to support approval. We oversee quality and planning and can share progress photos or arrange an inspection before shipment.

Step 4: Export Documentation and Customs Support

We prepare the export declaration and shipping documents and supply the vehicle documents, the body certification documentation and the European Certificate of Conformity. We coordinate with your clearing agent in Botswana so the import and the registration process run without surprises.

Step 5: Shipping and Delivery

Botswana is landlocked, so vehicles are shipped to a southern African port, usually Walvis Bay or Durban depending on your location, and continue by road under a transit procedure. We plan the routing with you and keep you informed until the vehicle reaches you.

 Planning a New Vehicle for Your Reserve or Lodge?

Tell us who you carry, where you drive and what your season looks like. Our specialists will work out the chassis and body with you and prepare a clear proposal including certification and delivery, with no obligation.



Robert Brand

Sales Executive

Tel: + 31 (0) 6 39 32 28 00

r.brand@schaften.com

Frequently Asked Questions Botswana

  • It depends on what you carry. A purpose-built game viewer on a lighter 4x4 chassis is excellent for small groups on short drives from a camp, and if that is your operation we will tell you it is the better buy. The Atego 1725 4x4 makes sense when you carry a larger group, over longer distances, with luggage or equipment, or in conditions where a lighter vehicle is working at its limit. It gives you the payload and body length for a proper passenger body while keeping the all-wheel-drive capability and manoeuvrability you need on a track.

  • Yes, but it becomes a different category of vehicle and different requirements apply. Seating and restraints, occupant protection, emergency exits, access and the roadworthiness and permit requirements for passenger carrying vehicles all come into play, and in Botswana that is stricter again where paying passengers are involved. The practical consequence is that the body has to be designed and documented to be approvable from the outset. We work with bodybuilders who build to a certifiable standard and produce the supporting documentation, and we coordinate with your agent on what the local authorities will require.

  • For any vehicle that will be registered and used on a public road in Botswana, yes. Botswana drives on the left and right-hand-drive vehicles are the norm. Mercedes-Benz builds the Atego in right-hand drive and we source accordingly through our European network. If the vehicle will operate exclusively inside a private reserve and never on a public road, different requirements may apply, and we check that with you and your agent before you commit.

  • Carefully, because it is the single most important design question on this kind of vehicle and the one most often underestimated. A 4x4 chassis already sits high, and tiered seating raises the mass of the occupants further. We work with the bodybuilder on seating height and layout, floor and body construction, weight distribution and, where appropriate, suspension specification, so the finished vehicle is stable on a cambered and rutted track with a full load rather than only on a flat yard.

  • Botswana is landlocked, so the vehicle is shipped by sea to a southern African port, usually Walvis Bay or Durban depending on where you are based, and continues by road under a transit procedure. For the import you will need a commercial invoice, a bill of lading, export documents and the vehicle and body documentation. Botswana is part of the Southern African Customs Union, so the regional tariff applies along with local taxes, and import and registration requirements including any rules on vehicle age can change. We check the current position with you and your clearing agent before you commit.