A Mercedes heavy transport truck carrying components for a wind turbine.

Trucks for Sale in Gabon: Heavy Tippers for Mining Operations

Gabon’s mining sector runs on tippers. Manganese around Moanda and Franceville, the iron ore potential at Belinga, gold in Ogooué-Ivindo and Haut-Ogooué, and the aggregate and laterite movement that keeps access roads usable through a climate that rains for most of the year. At Schaften Automotive we supply the vehicles for that work. From our headquarters in the Netherlands, we deliver heavy tippers from Mercedes-Benz, MAN, IVECO and other leading European brands, with bodies specified for the material you actually move. We arrange everything from A to Z, including the BIETC, the documentation and delivery to Owendo or Port-Gentil.

Mercedes-Benz Arocs 8x4 with truck-mounted concrete boom pump

More Than a Supplier: Your Sparring Partner from A to Z

Gabon is a specific set of conditions, and they are different from the mining markets further south. Roughly eighty percent of the country is rainforest. The climate is equatorial, which means high humidity all year and a rainy season that is long rather than seasonal in the way a Katanga operation experiences it. Laterite roads in that climate are rutted, soft and slippery for much of the year, and they need constant rebuilding. Humidity and rain accelerate corrosion in a way a dry mining region never shows you.


Distances compound it. Mining sites in Haut-Ogooué and Ogooué-Ivindo sit hundreds of kilometres inland from the coast, with the Transgabonais railway and a limited road network as the links to Owendo. Workshops outside Libreville, Port-Gentil and Franceville are thin on the ground, and parts take time. That changes what a sensible specification looks like. A truck your own mechanics cannot keep running on site is not an asset, it is a very expensive parked object.


That is why we don’t start from a catalogue. We start by understanding the operation: the material and its density, your haul distances and gradients, how your roads behave in the wet months, your loading equipment, the site standard that applies at the gate, and what your workshop can realistically maintain and stock. Based on that, we advise you on chassis, body and equipment. Once you have decided, we take care of the rest: bodywork, export documentation, the BIETC, conformity certification and shipping. You have one point of contact throughout.

6x6 or 8x4: Choosing by Road and Season

This is not a preference question. In Gabonese conditions the two configurations answer different problems, and many operations end up running both.


6x6 for Traction

Three driven axles with reduction gearing and differential locks keep a loaded tipper moving on a wet laterite road, a soft pit ramp or a newly built section that has not consolidated. In a climate with this much rain, that is often the difference between a fleet that works and a fleet that waits. A 6x6 is the right choice where ground conditions, not payload, are your limiting factor.

8x4 for Payload

Two steering front axles and two driven rear axles give you a higher permitted gross weight, more payload within the axle limits and a load spread over a larger footprint. Where your haul roads are maintained and your constraint is tonnes per cycle, an 8x4 moves more material at a lower cost per tonne. It is also the better answer on established routes and on surfaced sections.

Specifying the Tipper Body

A standard European construction tipper is not a Gabonese mining body, and this is where most of the value sits.

  • Body volume sized to density. Manganese ore is heavy, and iron ore heavier still. A body sized by volume will put you over your axle limits long before it is full, so we size it to the weight you can actually carry.
  • Release characteristics for wet material. Laterite and fine ore in this climate are sticky more often than not. Body profile, floor angle, surface finish and liner systems determine whether your load tips out cleanly or leaves a crust that costs you payload on every cycle and crew time to clear.
  • Wear-resistant steel with floor and side thickness matched to the abrasiveness of your material and to your loading equipment, since a shovel loading rock from height imposes very different stresses from a loader handling laterite.
  • Reinforced subframes, mountings and hydraulics for a continuous duty cycle rather than occasional tipping.
  • Stability when tipping on uneven and sloping ground, which on a site under constant development is the normal condition.
  • Corrosion protection specified for permanent humidity, which here is not a detail but a determinant of how long the body lasts.
  • Tailgate and sealing so you are not losing material along the haul road, which on a long cycle adds up.
food-man-33-400-6x6-drinker-water-project-africa
schaften-3x-man-trucks-in-stock

Specified for Gabonese Conditions

  • Rain and mud: traction, tyre choice, ground clearance, protected underbody components, sealed electrics and a body that actually releases its load.
  • Humidity and corrosion: protective treatment, sealed connectors and material choices for an environment that attacks steel and electrics all year.
  • Dust in the drier months: multi-stage air filtration with pre-cleaners, and sealed bearings and joints.
  • Gradients: engine braking, cooling and axle ratios for forest roads that climb and descend continuously.
  • Serviceability first: component choices your own mechanics know, with realistic parts availability, and a specification you can standardise across the fleet so parts and knowledge are shared rather than duplicated.
  • Parts on site: we recommend a starter package shipped with the vehicles, because a fleet several hundred kilometres from Libreville depends on what is in your own store.
  • Site standards: beacons, cameras, reflective marking, fire extinguishers, speed management and whatever the operator requires before a vehicle passes the gate, which differs between sites and is worth establishing before anything is built.


We supply 6x6 and 8x4 chassis such as the Mercedes-Benz Arocs and Zetros, the MAN TGS and the IVECO T-Way and X-Way.

New or Used: What Is Possible in Gabon

This is worth being clear about, because it is a real advantage here. Gabon raised the age limit for imported used vehicles to ten years at the end of 2023, after an earlier increase from five to eight years. For a mining operation that opens up a budget that is simply not available in markets with a three or five year limit: a well maintained European tipper of six or seven years old, properly inspected and with a fresh body, can be a far better value proposition than a new unit, particularly when you are building a fleet rather than buying a single truck.


What matters is that the age is calculated from first registration and that the documentation proves it. We supply the original registration document with every used vehicle, and we check the current position before you commit, because this rule has changed three times in a decade and could change again. If your operation needs new units, we supply those too, and we will tell you honestly which makes more sense for your case rather than steering you to whichever we happen to have.

oilgas-man-18-250-4x4-service-truck-1
schaften-3x-man-trucks-in-stock

Documentation, Conformity and Shipping

Three things take preparation for Gabon, and all three are better dealt with before shipment than afterwards.

  • The BIETC. The electronic cargo tracking note is mandatory for shipments to Gabon and must be arranged before the cargo leaves the port of loading. A shipment arriving without a valid BIETC will not clear, and correcting it at destination is expensive and slow. We handle this as part of our documentation work rather than leaving it with you.
  • Conformity assessment. Gabon operates a conformity programme under the national standards agency, with a certificate of conformity required for regulated products. We check whether and how it applies to your shipment and arrange the inspection and certification where it does.
  • Documentation in French. Gabonese customs works in French, and documents in other languages create delay. We supply the commercial invoice, the vehicle documents, the registration document for used units and the supporting paperwork in a form your clearing agent can use.


Vehicles ship to Owendo, the port serving Libreville and the mineral export terminal, or to Port-Gentil. From there they move inland by road, and for some destinations the Transgabonais railway is part of the route. We plan the delivery with you and your agent against your project schedule.

The Rest of the Mining Support Fleet

Through the same point of contact we can also arrange:

  • water tankers for haul road dust suppression and site supply;
  • fuel and lubrication trucks for servicing plant in the pit;
  • mobile workshops with crane, generator, compressor and parts storage;
  • crane and recovery trucks for lifting, installation and pulling equipment out of soft ground;
  • low-loaders and heavy tractor units for moving excavators, loaders and plant;
  • tractor units and tipping trailers for ore haulage to rail and port;
  • timber trucks for forestry operations, which in Gabon often sit alongside mining in the same region;
  • crew transport for shift movements across a large concession.


Because we deliver everything through one point of contact, several units can be combined in one shipment, which reduces freight cost and gives you one set of documentation rather than several.

oilgas-man-18-250-4x4-service-truck-1
schaften-3x-man-trucks-in-stock

Mercedes-Benz, MAN, IVECO & More

Our range covers the leading European commercial vehicle brands:

  • Mercedes-Benz: the Arocs for heavy mining and construction work, and the Zetros for the most demanding off-road conditions.
  • MAN: the TGS, with strong drivetrains and all-wheel-drive configurations.
  • IVECO: the T-Way and X-Way, built for demanding on and off road operations.
  • Scania: a popular choice for heavy haulage work.


Other brands are available on request. Gabon drives on the right, so European left-hand-drive vehicles are a natural fit, and these brands have a recognised presence in Central Africa. Not sure which configuration suits your operation? We compare the options with you objectively, based on your material, your roads, your seasons and what you can keep running.

How We Arrange Your Purchase from A to Z

Step 1: Consultation and Operational Review

We discuss the material and its density, haul distances and gradients, how your roads behave in the wet months, loading equipment, the site vehicle standard, your workshop capacity and parts situation, and your budget. As your sparring partner, we tell you where a body specification will cost you payload or cycle time, and where new or used makes the bigger difference to your case.

Step 2: Selection and Configuration

We select suitable 6x6 and 8x4 chassis from our stock or through our European network and specify the tipper bodies with our bodybuilders. You receive a clear proposal with specifications, pricing and planning, including a recommended spare parts package.

Step 3: Bodywork and Technical Preparation

The tipper body and equipment are built and mounted by specialised European bodybuilders, following the chassis manufacturer’s guidelines, with the corrosion protection and site equipment specified for your operation. We oversee quality and planning and can share progress photos or arrange an inspection before shipment.

Step 4: BIETC, Documentation and Conformity

We prepare the export declaration and shipping documents, arrange the BIETC before the cargo leaves the port of loading, and supply the vehicle documents, the registration document for used units and the European Certificate of Conformity. Where a conformity certificate is required for your shipment, we arrange the inspection and certification. We coordinate with your clearing agent in Libreville so nothing stops at the quay.

Step 5: Shipping and Delivery

We arrange shipping to Owendo or Port-Gentil and coordinate the onward movement to your site with experienced partners. We plan the timing against your project schedule and keep you informed at every stage until each unit arrives.

Equipping a Mining Operation in Gabon?

Tell us what you are hauling, what your roads look like in the rainy season and where your site is. Our specialists will advise you personally and prepare a clear proposal including delivery, with no obligation.




Robert Brand

Sales Executive

Tel: + 31 (0) 6 39 32 28 00

r.brand@schaften.com

Frequently Asked Questions About Trucks for Sale in Gabon

  • We supply heavy chassis from Mercedes-Benz, MAN, IVECO and other leading European brands, including the Arocs, the off-road Zetros, the MAN TGS and the IVECO T-Way and X-Way, in 6x6 and 8x4 configurations. We combine these with tipper bodies specified for manganese, iron ore, laterite and aggregate, built by specialised European bodybuilders, and we also supply the supporting fleet from water tankers and fuel trucks to mobile workshops, low-loaders and timber trucks.



  • Yes. Gabon raised the age limit for imported used vehicles to ten years from first registration at the end of 2023, having previously moved it from five to eight years. For a mining operation that is a genuine advantage, because a well maintained European tipper of six or seven years old with a fresh body can deliver far better value than a new unit, particularly across a fleet. We supply the original registration document with every used vehicle so the age is documented, and we verify the current rule before you commit, since this regulation has changed several times.

  • The BIETC is the electronic cargo tracking note required for shipments to Gabon, and yes, you need one. It has to be arranged before the cargo leaves the port of loading, and a shipment arriving without a valid BIETC will not clear customs. Sorting it out at destination is expensive and slow. We arrange the BIETC as part of our documentation work, along with the export declaration, the vehicle documents and any conformity certification your shipment requires, so this is not something you have to manage yourself.

  • It depends on what limits you. If your haul roads are maintained and your constraint is tonnes per cycle, an 8x4 carries more within the axle limits and gives you a better cost per tonne. If your constraint is ground conditions, which in this climate it often is, a 6x6 keeps working when an 8x4 is stuck. Many Gabonese operations end up running both for exactly that reason. We go through your roads and your seasons with you rather than recommending one by default.

  • By sea to Owendo, the port serving Libreville, or to Port-Gentil, and then inland by road, with the Transgabonais railway forming part of the route for some destinations. For the import you will need a commercial invoice, a bill of lading, export documents, the vehicle documentation, the registration document for used units and a valid BIETC, with clearance handled by your agent in French. We coordinate with your agent, plan the timing against your project schedule and stay involved until each unit reaches your site rather than only until it reaches the quay.

  • Yes, and for an operation this far from a dealer network we would usually recommend it. A consistent fleet simplifies your parts stock and your mechanics’ work, which matters far more here than it does closer to a city. We can combine several units in one shipment to reduce cost and keep the documentation to one file, include a starter package of spare parts, and phase delivery against your project schedule. We stay available for additions, replacement cycles and follow-up orders.