Water Tankers for Sale in Mauritania: 6x6 Trucks for Remote Mining Operations
In the Mauritanian desert, water is the constraint on everything. Haul road dust suppression at Zouerate and F’Derik, drilling and compaction water on the gold and copper projects inland from Akjoujt and Nouakchott, camp supply at sites hundreds of kilometres from the nearest town, and fire water on operations where help is a long way off. At Schaften Automotive we supply the vehicles that move it. From our headquarters in the Netherlands, we deliver 6x6 water tankers on chassis from Mercedes-Benz, MAN, IVECO and other leading European brands, specified for sand, heat and the water you are actually pumping. We arrange everything from A to Z, including documentation and delivery to Nouakchott or Nouadhibou.
More Than a Supplier: Your Sparring Partner from A to Z
A water tanker looks like a simple vehicle. On a Mauritanian mine site it is not, and the things that go wrong are rarely the ones in the brochure.
The water itself is the first problem. Mine water here comes from boreholes, and in much of the country that water is brackish, saline or high in dissolved minerals. A standard mild steel tank carrying that water corrodes from the inside, and it does so faster than most operators expect. We have seen specifications where the chassis is perfect and the tank is the wrong material for the water it will spend ten years holding. Tell us what your borehole analysis says and we will specify the tank around it rather than around a catalogue.
The second is sand. Deep sand is a traction problem, a tyre problem and a weight distribution problem, and a full water tank is a heavy, moving load. Where you are operating in soft ground, the sensible tank size is often smaller than the chassis can legally carry, because a vehicle that bogs down with twenty thousand litres on board is a recovery operation rather than a water truck.
The third is surge. Water moves. On a rough haul road, an inadequately baffled tank will push a loaded vehicle around on braking and through bends, and on a graded ramp that is a safety issue rather than a comfort one. Baffle design is not an extra, it is a structural requirement, and we treat it that way.
That is why we don’t start from a catalogue. We start by understanding the operation: your water source and its analysis, your haul road lengths and surfaces, how much water you need per shift and over what distance, your ground conditions, the operator standard at your gate, and what your own workshop can maintain. Based on that, we advise you on chassis, tank and equipment. Once you have decided, we take care of the rest: bodywork, export documentation, compliance checks and shipping. You have one point of contact throughout.
Specifying the Tank
Material and Protection
- Tank material chosen for your water, whether that means a properly coated and lined steel tank, stainless steel or polyethylene, with the decision based on your borehole analysis rather than on what is cheapest to build.
- Internal access and inspection so the lining can actually be checked and maintained, which on a ten year asset matters.
- External protection against sand abrasion and UV, which in this climate degrades coatings quickly.
Structure and Capacity
- Baffles and compartments designed for the surge loads of a full and a part-full tank on rough ground, which is the single most common weakness in a cheaply built water truck.
- Capacity sized to your ground and your cycle, not to the chassis maximum. We would rather sell you the tank that keeps working than the biggest one that fits.
- Mounting and subframe specified for a continuous duty cycle over washboard and graded surfaces, with the flexing that implies.
Equipment
- PTO-driven pump sized to your filling and discharge requirements, with dry running protection.
- Self-filling capability with suction hose and strainer, because on a remote site you will not always have a pressurised fill point.
- Quick-fill connection for where you do, since filling time is a large part of your cycle time.
- Spray bars front, rear and side, with cab control and adjustable flow, so your operator can match application to surface rather than flooding one section and leaving the next dry.
- Water cannon or monitor for stockpiles, tips and wider coverage.
- Fire-fighting provision where your operation requires it, with the hose reel, foam capability and certification to match.
- Level indication the operator can actually see, because a tanker that runs dry mid-run costs you a cycle.
- Hose storage and work lighting for night shifts.
Why 6x6
Three driven axles with reduction gearing and differential locks are what keep a loaded tanker moving in soft sand, on an unconsolidated ramp or on a new section of haul road. In Mauritanian conditions that is not a luxury specification. A 6x4 will work on maintained roads and will stop working the moment it leaves them, and a water truck that only works on good surfaces is not much use when the job is to keep those surfaces usable.
Where your operation runs entirely on established and maintained haul roads, we will tell you a 6x4 does the job for less money. We would rather have that conversation than sell you an axle you do not need.
Specified for Mauritanian Conditions
- Extreme heat: cooling capacity for sustained low-speed work at high ambient temperatures, where airflow through the radiator is limited and a tanker spends its day crawling.
- Sand and dust: multi-stage air filtration with pre-cleaners, sealed bearings and joints, and protection for every component that fine sand can reach.
- Tyre and traction specification for soft ground, including flotation options and provision for pressure management.
- Sun protection for cab, seals, hoses and electrics, which in this climate age faster than the mechanical components.
- Distance: fuel capacity and spares provision for a vehicle operating far from any workshop.
- Serviceability first: component choices your own mechanics know, a specification you can standardise across the fleet, and realistic parts availability.
- Parts on site: we recommend a starter package shipped with the vehicles, including pump and spray system wear parts, because on a site inland from Nouadhibou your store is your supply chain.
- Site standards: beacons, cameras, reflective marking, fire extinguishers, speed management and whatever the operator requires before a vehicle passes the gate, which differs between mines and is worth establishing before anything is built.
We supply 6x6 chassis such as the Mercedes-Benz Arocs and Zetros, the MAN TGS and the IVECO T-Way.
The Rest of the Mining Support Fleet
Through the same point of contact we can also arrange:
- tippers in 6x6 and 8x4 for ore, waste and haul road construction;
- fuel and lubrication trucks for servicing plant in the pit;
- mobile workshops with crane, generator, compressor and parts storage;
- crane and recovery vehicles, which for a fleet operating this far from help are not optional;
- low-loaders and heavy tractor units for moving excavators, loaders and drill rigs;
- crew transport for shift movements across a large concession;
- refrigerated vehicles for camp catering and cold chain supply.
Because we deliver everything through one point of contact, several units can be combined in one shipment, which reduces freight cost and gives you one set of documentation.
Documentation, Shipping and Compliance
Vehicles ship to Nouakchott or to Nouadhibou, which for operations in the north around Zouerate and F’Derik is usually the shorter route. From there they move inland by road, and we plan the routing with you and your agent against your schedule.
For the import you will need a commercial invoice, a bill of lading, export documents, a certificate of origin and the vehicle documentation, with clearance handled by a licensed agent, and customs procedures conducted in French. Mauritania applies import duties and VAT on the customs value, and we recommend having your agent run a landed cost before you commit rather than working from the purchase price alone. Import and registration requirements, including any rules on vehicle age, can change, so we verify the current position with you and your agent.
On our side, we check every order against the applicable European export rules, including the destination, the buyer and the end user. For mining operators and contractors working to international standards we are used to providing the documentation their own compliance teams require.
Mercedes-Benz, MAN, IVECO & More
Our range covers the leading European commercial vehicle brands:
- Mercedes-Benz: the Arocs for heavy site work and the Zetros for the most demanding off-road conditions.
- MAN: the TGS, with strong drivetrains and all-wheel-drive configurations.
- IVECO: the T-Way, built for demanding off-road operations.
- Scania: available where it suits your existing fleet and parts situation.
Other brands are available on request. Mauritania drives on the right, so European left-hand-drive vehicles are a natural fit. Not sure which configuration suits your operation? We compare the options with you objectively, based on your ground conditions, your water source, your cycle and what you can keep running.
How We Arrange Your Purchase from A to Z
Step 1: Consultation and Operational Review
We discuss your water source and its analysis, your haul road lengths and surfaces, your water demand per shift, your ground conditions, the operator’s vehicle standard, your workshop capacity and parts situation, and your budget. As your sparring partner, we tell you where a larger tank will cost you mobility, and where the tank material decision will cost you the asset.
Step 2: Selection and Configuration
We select suitable 6x6 chassis from our stock or through our European network and specify the tank and equipment with our bodybuilders. You receive a clear proposal with specifications, pricing and planning, including a recommended spare parts package.
Step 3: Bodywork and Technical Preparation
The tank, pump and spray system are built and mounted by specialised European bodybuilders, following the chassis manufacturer’s guidelines, with the lining, baffling and protection specified for your water and your ground. We oversee quality and planning and can share progress photos or arrange an inspection before shipment.
Step 4: Documentation, Compliance and Export
We prepare the export declaration and shipping documents and supply the vehicle documents, the European Certificate of Conformity and the equipment documentation. We check the order against the applicable export rules and coordinate with your clearing agent so the import runs without surprises.
Step 5: Shipping and Delivery to Site
We arrange shipping to Nouakchott or Nouadhibou and coordinate the onward movement to your site with experienced partners. We plan the timing against your schedule and keep you informed at every stage until each unit arrives at the mine rather than only until it reaches the quay.
Equipping a Mining Operation in Mauritania?
Tell us where your site is, where your water comes from and what your haul roads look like. Our specialists will advise you personally and prepare a clear proposal including delivery to site, with no obligation.
Robert Brand
Sales Executive
Frequently Asked Questions About Water Tankers for Sale in Mauritania
-
What water tankers can I buy through Schaften Automotive?
We supply 6x6 water tankers on chassis from Mercedes-Benz, MAN, IVECO and other leading European brands, including the Arocs, the off-road Zetros, the MAN TGS and the IVECO T-Way, with tanks and spray systems built by specialised European bodybuilders. We specify capacity, tank material, baffling, pump and spray equipment around your operation rather than offering a standard unit, and we also supply the rest of the mining support fleet through the same point of contact.
-
Why does the tank material matter so much here?
Because of what is in your water. Mine water in Mauritania comes from boreholes, and in much of the country it is brackish, saline or high in dissolved minerals. A standard mild steel tank carrying that water corrodes from the inside, often far faster than an operator expects, and by the time it shows you have a structural problem rather than a maintenance one. We ask for your borehole analysis and specify the tank around it, whether that means a properly coated and lined steel tank, stainless steel or polyethylene. It is the single decision most likely to determine whether the vehicle is still working in ten years.
-
What size tank should we specify?
Usually smaller than the chassis can legally carry, and that surprises people. In soft ground a fully loaded tanker is a recovery operation waiting to happen, and a vehicle that bogs down is not doing the job it was bought for. We size the tank to your ground conditions and your cycle, balancing the water you need per run against the mobility you need to complete it. We would rather sell you the tank that keeps working than the biggest one that fits.
-
Why do you make a point of baffling?
Because water moves and a full tank is a large moving mass. On a rough haul road an inadequately baffled tank pushes the vehicle around under braking and through bends, and on a graded ramp that becomes a safety issue rather than a comfort one. It is also the most common place where a cheaply built water truck is weak, because baffling is invisible on a quotation. We design it for the surge loads of a full and a part-full tank on your actual surfaces and treat it as a structural requirement rather than an option.
-
Do we need 6x6, or will a 6x4 do?
It depends on where the vehicle works. If your operation runs entirely on established and maintained haul roads, a 6x4 does the job for less money and we will tell you so. If the vehicle has to work in soft sand, on unconsolidated ramps or on new sections of road, which in Mauritanian conditions is usually part of the job, you need three driven axles with reduction gearing and differential locks. A water truck that only works on good surfaces is not much use when the job is to keep those surfaces usable.
-
How do the vehicles reach a remote site?
By sea to Nouakchott or to Nouadhibou, which for operations in the north around Zouerate and F’Derik is usually the shorter route, and then inland by road. For the import you will need a commercial invoice, a bill of lading, export documents, a certificate of origin and the vehicle documentation, with clearance handled by a licensed agent and customs procedures conducted in French. Duties and VAT apply on the customs value, so we recommend having your agent run a landed cost before you commit. We plan the routing and the onward movement with you and stay involved until each unit reaches your site.