Trucks for Sale in Namibia: 6x4 Tractor Units and Low-Loaders for Heavy Mining Machinery
Moving an excavator, a drill rig or a crusher module across Namibia is a planning exercise as much as a transport job. The uranium operations around Arandis and Swakopmund, the gold and copper mines inland from Karibib and Otjiwarongo, the lithium and zinc projects, the diamond operations in the south and the corridors running inland from Walvis Bay all depend on getting heavy plant where it needs to be. At Schaften Automotive we supply the vehicles for that work. From our headquarters in the Netherlands, we deliver right-hand-drive 6x4 tractor units from Mercedes-Benz, MAN, Scania, IVECO and other leading European brands, combined with low-loaders matched to the machines you are actually moving. We arrange everything from A to Z.
More Than a Supplier: Your Sparring Partner from A to Z
On a heavy haulage job the tractor is rarely what decides the outcome. The trailer, the axle configuration and the permit are.
Abnormal load movements in Namibia run under permits from the roads authority, with route approval, dimensional and mass limits, escort requirements and bridge restrictions. A combination that is legal at one configuration becomes a different application at another, and a trailer bought without reference to that regime can turn a routine move into a three week process. We ask what you are moving, how often and over which routes before we talk about tractors, because the answer decides the trailer and the trailer decides the tractor.
Then there is the country itself. Namibia has good tarred trunk routes and a very large network of gravel roads. A combination that is comfortable on the B1 behaves differently on a corrugated C road, and a lowbed with limited ground clearance will ground out on a mine access road that a local operator will tell you is fine. Distances are long, services between towns are few, and heat and dust are constant. A breakdown two hundred kilometres from the nearest workshop with a loaded excavator on the deck is a different kind of problem from a breakdown in Europe.
That is why we don’t start from a catalogue. We start by understanding the operation: the machines you move and their weights and dimensions, your routes and the permits they require, your frequency, your loading and unloading situation, and what your own workshop can maintain. Based on that, we advise you on tractor and trailer. Once you have decided, we take care of the rest: sourcing, technical preparation, export documentation, permit support and shipping to Walvis Bay. You have one point of contact throughout
Three Rules That Shape Every Purchase
We raise these in the first conversation rather than at the end, because they decide what is possible.
Right-Hand Drive Only
Namibia drives on the left, and the import of left-hand-drive vehicles from outside the Southern African Customs Union is prohibited, with very limited exceptions. A standard continental European tractor is not an option here.
We source right-hand-drive units through our European network, with the United Kingdom and Ireland as the natural markets for well maintained RHD vehicles from the same manufacturers running in Namibia today. The fleets there run the same Mercedes-Benz, MAN, Scania and IVECO models in the same configurations, with full service history. That is a sourcing strength rather than a workaround.
Import Permit and Point of Entry
An import permit from the relevant ministry is required, and Walvis Bay is the designated point of entry for imported second-hand vehicles, where compliance inspections are carried out. We prepare the documentation and coordinate with your clearing agent so the permit, the inspection and the shipment line up rather than arriving in the wrong order.
Age Rules and Duty
Namibia restricts the import of older second-hand vehicles, and the way that restriction applies to heavy commercial vehicles is not as clear cut as it is for cars and light commercials. The policy has also been under review. We check the current position for your specific vehicle with your agent before you commit rather than assuming, because this is exactly the kind of rule that changes.
Duty is the other half of the picture. Namibia is part of the Southern African Customs Union, which means vehicles originating within the union move without the common external tariff, while European units do not. That is a real cost difference and we are open about it. Where we compete is on the specification, the configuration and the trailer combination rather than on pretending the tariff is not there, and for a heavy haulage combination built around your actual machines that is often where the money is.
Specifying the Tractor
- Gross combination mass rating matched to your heaviest intended load rather than to your average one, because the combination you buy is the one you will be asked to move the big machine with.
- Drivetrain and axle ratios for pulling at low speed under full load, on gradients and on loose surfaces, which is a different specification from long-distance linehaul.
- Cooling capacity for sustained heavy work in high ambient temperatures, where a tractor specified for European conditions runs out of margin.
- Engine braking or retarder, which on the descents and on a loaded combination is a safety item rather than a comfort one.
- Fifth wheel and coupling specified for the trailer, including heavy duty and sliding options where your loads require them.
- Air filtration and sealing for dust, with pre-cleaners and a service interval that reflects Namibian conditions rather than a European duty cycle.
- Ground clearance and approach angles for mine access roads and unprepared loading areas.
- Driver provision for long distances, including bunk, climate control and storage, because the routes here are long and empty.
We supply tractor units including the Mercedes-Benz Actros and Arocs, the MAN TGX and TGS, the Scania R and G series and the IVECO S-Way and X-Way, in right-hand drive.
Specifying the Low-Loader
This is where the job is actually won or lost.
- Deck height and loading angle matched to the machines you move, since an excavator that cannot climb the ramps without grounding is a machine that does not get loaded.
- Detachable gooseneck or ramp configuration, which determines how you load and how long it takes.
- Axle count and spread for load distribution within the legal and permit limits on your routes, which is usually the binding constraint rather than the trailer’s structural capacity.
- Extendable decks where you move long items such as booms, conveyor sections or structural steel.
- Width and outriggers for wide loads, with the escort and permit implications that follow.
- Ground clearance for mine access roads, which on a lowbed is a genuine constraint rather than a detail.
- Suspension type, hydraulic or mechanical, chosen for your surfaces and your load types.
- Lashing points, chains and load securing specified for the machines you carry, properly rated and documented.
We will also tell you where a modular hydraulic trailer is overkill for what you move, and where a fixed lowbed will limit you the first time you buy a bigger machine.
The Rest of the Mining Support Fleet
Through the same point of contact we can also arrange:
- tippers in 6x4, 6x6 and 8x4 for ore, waste and haul road construction;
- water tankers for dust suppression and site supply;
- fuel and lubrication trucks for servicing plant in the pit;
- mobile workshops with crane, generator, compressor and parts storage;
- crane and recovery vehicles, which for a heavy haulage operation are a necessity rather than an extra;
- tractor units and tipping or flat trailers for bulk and general haulage on the corridors;
- crew transport for shift movements across a large concession.
Because we deliver everything through one point of contact, several units can be combined in one shipment, which reduces freight cost and keeps the permit and documentation work to one file.
Specified for Namibian Conditions
- Heat: cooling and fluid specification for sustained work at high ambient temperatures.
- Dust and sand: multi-stage air filtration with pre-cleaners, sealed bearings and joints, and protection for every component fine dust can reach.
- Gravel roads and corrugation: suspension, chassis and trailer specification for surfaces that destroy equipment built for tarmac.
- Distance: fuel capacity, spares provision and a specification that keeps working a long way from a workshop.
- Serviceability first: component choices your mechanics know, with parts available through the Namibian and South African networks, and a specification you can standardise across the fleet.
- Site standards: beacons, cameras, reflective marking, fire extinguishers, speed management and whatever the mine requires before a vehicle passes the gate.
Corridor Work
Walvis Bay is not only your port of entry. It is the gateway for the Trans-Kalahari and Trans-Zambezi corridors into Botswana, Zambia and the Democratic Republic of Congo, and a heavy haulage operator in Namibia often ends up working across those borders.
If that is your direction, tell us early, because it changes the specification. Cross-border work means transit procedures, regional insurance, different permit regimes for abnormal loads in each country, and border delays that make uptime worth more than marginal efficiency. A combination configured only for Namibian domestic work can turn out to be the wrong one the moment you win a regional contract.
How We Arrange Your Purchase from A to Z
Step 1: Consultation and Operational Review
We discuss the machines you move, their weights and dimensions, your routes and the permits they require, your frequency, your loading situation, your workshop capacity and your budget. As your sparring partner, we start with the trailer and the permit regime rather than with the tractor, because that is what actually decides the combination.
Step 2: Sourcing and Configuration
We source suitable right-hand-drive tractor units through our European network and specify the low-loader with our trailer manufacturers, matched to your machines and your routes. You receive a clear proposal with specifications, load diagrams, pricing and planning.
Step 3: Technical Preparation
Units are inspected, serviced and prepared before shipment, with the coupling, protection and site equipment specified for your operation. We can share photos or arrange an inspection before you commit.
Step 4: Permit, Documentation and Export
We prepare the export declaration and shipping documents and supply the vehicle and trailer documentation, the European Certificate of Conformity and the technical data your permit applications will require. We coordinate with your clearing agent on the import permit and the inspection at Walvis Bay so the paperwork and the vessel line up.
Step 5: Shipping and Delivery
We arrange shipping to Walvis Bay and coordinate the clearance and onward movement with your agent. We plan the timing against your operational needs and keep you informed at every stage until the combination is working.
Moving Heavy Plant in Namibia?
Tell us what machines you move, over which routes and how often. Our specialists will advise you personally and prepare a clear proposal including the trailer, compliance and delivery, with no obligation.
Robert Brand
Sales Executive
Frequently Asked Questions About Trucks for Sale in Namibia
-
Can you supply right-hand-drive tractor units?
Yes, and it is the only thing we will offer you for Namibia. Namibia drives on the left and the import of left-hand-drive vehicles from outside the Southern African Customs Union is prohibited, with very limited exceptions. We source right-hand-drive units through our European network, principally from the UK and Irish markets, where the same manufacturers and models run in the same configurations with full service history. We supply the Mercedes-Benz Actros and Arocs, the MAN TGX and TGS, the Scania R and G series and the IVECO S-Way and X-Way in right-hand drive.
-
What is the age limit for importing trucks into Namibia?
Namibia restricts the import of older second-hand vehicles, but how that applies specifically to heavy commercial vehicles is less clear cut than it is for cars and light commercials, and the policy has been under review. We would rather tell you that honestly than quote you a number that turns out to be wrong at Walvis Bay. We check the current position for your specific vehicle with your clearing agent before you commit, and we tell you straight away if a unit will not qualify.
-
Why do you start with the trailer rather than the truck?
Because on a heavy haulage job the trailer and the permit decide the outcome. Abnormal load movements run under permits from the roads authority, with route approval, mass and dimensional limits, escort requirements and bridge restrictions, and axle count and spread usually bind before the trailer’s structural capacity does. Deck height and loading angle decide whether your excavator can climb the ramps at all. Once we know what you move, over which routes and how often, the trailer follows, and the tractor follows the trailer. Doing it the other way round is how operators end up with a capable truck and a combination they cannot get a permit for.
-
How do European trucks compete with South African ones on price?
They do not always, and we will not pretend otherwise. Namibia is part of the Southern African Customs Union, so vehicles originating within the union move without the common external tariff while European units do not. That is a real cost difference. Where we compete is on the combination: a tractor and low-loader specified around your actual machines, your routes and your permit regime, sourced in right-hand drive from markets where well maintained units are available, with the whole thing arranged through one point of contact. For a heavy haulage operation that is usually where the money is, but we would rather have that conversation openly than surprise you with a landed cost.
-
Will a low-loader cope with mine access roads?
Only if it is specified for them, and that is a question worth asking before you buy rather than after. Ground clearance on a lowbed is a genuine constraint, and a trailer that is comfortable on the tarred trunk routes can ground out on a corrugated gravel approach or an unprepared loading area. Suspension type matters for the same reason. We specify deck height, clearance and suspension around the roads you actually drive, including the last few kilometres into the site, which is usually where the problems are.
-
Can Schaften Automotive supply a complete fleet?
Yes, and for an operation this far from a dealer network it usually makes sense. A consistent fleet simplifies your parts stock and your mechanics’ work. We can combine several units in one shipment to reduce freight cost and keep the permit and documentation work to one file, include a spare parts package, and phase delivery against your schedule. Alongside tractors and low-loaders we supply tippers, water tankers, fuel trucks, mobile workshops, crane and recovery vehicles and crew transport, all through the same point of contact.