A Mercedes heavy transport truck carrying components for a wind turbine.

Water Trucks for Sale in Niger: 4x4 and 6x6 Tankers for Village Water Supply

Across Tahoua, Zinder, Maradi, Agadez, Tillabéri and Diffa, there are communities where the borehole has failed, where the water table has dropped below the pump, or where there has never been a working source within reach. Getting drinking water to those places is done by truck, over sand, laterite and tracks that do not appear on a map. At Schaften Automotive we supply the vehicles for that work. From our headquarters in the Netherlands, we deliver 4x4 and 6x6 water tankers on chassis from Mercedes-Benz, MAN, IVECO and other leading European brands, built to a drinking water specification rather than a general purpose one. We arrange everything from A to Z, including the transit routing to Niamey.

Mercedes-Benz Arocs 8x4 with truck-mounted concrete boom pump

More Than a Supplier: Your Sparring Partner from A to Z

Beyond the water itself, three conditions shape the vehicle.


The ground. Deep sand in the north and west, laterite that turns slippery in the short rainy season, and tracks rather than roads for the last stretch into a village. A full water tank is a heavy, moving load, and a vehicle that bogs down with a village waiting is worse than useless. This is why the tank is usually smaller than the chassis could legally carry: mobility is the point.


The source water. Groundwater across much of Niger is high in dissolved minerals, and in some areas brackish. That matters for the tank lining and for the pump, and it matters for what treatment your protocol requires before the water is distributed. Tell us what your water analysis says and we will specify around it.


The isolation. There is no dealer network near most of these sites, parts take weeks, and a vehicle that your own mechanic cannot maintain is a vehicle that stops. A standardised fleet with a serious parts package is worth more than individually optimal vehicles.


That is why we don’t start from a catalogue. We start by understanding the operation: who you are supplying and how many people, your distances and the condition of the last few kilometres, where you fill and what the water analysis says, your treatment protocol, your maintenance capacity, and the standards your organisation or funder applies. Based on that, we advise you on chassis, tank and equipment. Once you have decided, we take care of the rest: bodywork, export documentation, compliance checks, transit arrangements and delivery. You have one point of contact throughout.

Drinking Water Is Not the Same as Water

This is the most important thing on this page, and it is where most specifications go wrong.


A water tanker for dust suppression on a mine site and a water tanker for supplying a village are not the same vehicle. The first moves water. The second moves water that people will drink, and that changes the tank material, the internal coating, the fittings, the pump, the hoses, the filling arrangement, the discharge system and the cleaning regime. A tanker built to the wrong specification will deliver water that is unsafe long before anyone notices, because contamination in a tank is not visible from the outside.

We build to a drinking water specification:

  • Tank material and internal lining suitable for potable water and certified as such, with the documentation to prove it.
  • Sealed filling points with covers and screens, so the tank is not open to dust, insects and whatever else is in the air at a filling point.
  • Food grade hoses and fittings throughout, including on the filling side, because contamination usually enters there rather than at the tap.
  • Internal access for cleaning and inspection, with a hatch large enough to actually clean through and a surface that can be cleaned.
  • Drainage that empties completely, since standing water in a tank in this climate is a problem within days.
  • Chlorination or dosing provision where your protocol requires it.
  • A distribution manifold with multiple taps at a height people can actually fill a jerrycan from, which sounds obvious and is routinely got wrong.
  • Separation from any other use, because a tanker that has carried anything else is not a drinking water tanker any more, whatever you clean it with.


If your operation also needs water for construction, dust control or firefighting, we will tell you to specify a separate vehicle for that rather than compromise this one. That is usually not what a supplier wants to hear themselves say.

4x4 or 6x6

4x4 for Access

A shorter, lighter vehicle reaches villages a larger one cannot. Narrow tracks, tight turns between compounds, informal crossings and soft sand all favour a compact 4x4 with a modest tank. Where your job is reaching many small communities rather than delivering large volumes to a few, this is usually the right answer and it costs less.


6x6 for Volume and Distance

Three driven axles carry more water further, which matters when you are supplying a larger settlement, a displacement site or a school and health centre with real daily demand, or when the round trip from your filling point is long. The traction also keeps a loaded vehicle moving in deep sand where a 4x4 at full load will struggle.

Choosing Honestly

Most programmes we work with end up with a mix: 6x6 units doing the volume runs to the larger sites, 4x4 units reaching the places the bigger trucks cannot. We will tell you where a larger vehicle will simply not arrive, which is a conversation better had now than after delivery.

Specified for Nigerien Conditions

  • Heat: cooling capacity for sustained low-speed work at very high ambient temperatures, where airflow is limited and a tanker crawls all day.
  • Sand and dust: multi-stage air filtration with pre-cleaners, sealed bearings and joints, and protection for every component fine sand can reach.
  • Tyres and traction for soft ground, with flotation options and provision for pressure management.
  • Baffles designed for the surge loads of a full and a part-full tank on rough ground, which is a structural requirement rather than an option and the most common weakness in a cheaply built water truck.
  • Sun protection for cab, seals, hoses and electrics, which here age faster than the mechanical components.
  • Distance: fuel capacity and spares provision for a vehicle operating far from any workshop.
  • Serviceability first: component choices your mechanics know, a specification you can standardise across the fleet, and realistic parts availability.
  • Parts on site: we recommend a starter package shipped with the vehicles, including pump and hose system wear parts, because your store is your supply chain.
  • Training on delivery, on the vehicle and on the cleaning and hygiene regime, because the second one is what keeps the water safe.


We supply 4x4 and 6x6 chassis such as the Mercedes-Benz Zetros and Arocs, the MAN TGM and TGS, and the IVECO T-Way and Eurocargo 4x4.

food-man-33-400-6x6-drinker-water-project-africa
schaften-3x-man-trucks-in-stock

Who We Supply

We work with government services, communes, water authorities, international organisations, NGOs and private operators supplying surrounding communities. If you are working to a funder’s technical specification or a procurement document, send us the technical section. We will tell you honestly what we can deliver against it, what we cannot, and where a requirement allows an alternative. We will also supply the certification and documentation your funder or auditor will ask for, including potable water certification for the tank and lining.


We would rather tell you that before you tender than after you have committed.

The Rest of the Fleet

Through the same point of contact we can also arrange:

  • 4x4 and 6x6 flatbeds and cargo trucks for pumps, pipes, drilling consumables and general supply;
  • workshop vehicles with crane, generator, compressor and parts storage;
  • tippers for access road and borehole site works;
  • fuel trucks for servicing plant and generators on remote sites;
  • crew and field team transport;
  • refrigerated vehicles for cold chain supply, including vaccines and medical supplies;
  • recovery vehicles, because at some point a loaded truck will need pulling out.


Because we deliver everything through one point of contact, several units can be combined in one shipment and one transit movement, which on a landlocked destination has a real effect on cost.

oilgas-man-18-250-4x4-service-truck-1
schaften-3x-man-trucks-in-stock

Getting the Vehicles to Niger

Niger is landlocked, and the routing is something we plan with you per shipment rather than promising in advance. The main options are:

  • Lomé, with onward transit through Togo and Burkina Faso, which has carried a large share of Nigerien transit in recent years.
  • Cotonou, historically the shortest route to Niamey, with the routing depending on the status of the border crossings at the time of shipment. A corridor through Nigeria reopened in early 2026 and discussions on the direct crossing have been under way since.
  • Tema, with transit through Ghana and Burkina Faso, used by some operators.


Conditions on each corridor change, so we plan with our transit partners based on the situation at the time rather than defaulting to one route. Transit times here are measured in weeks, and we plan the delivery against your programme rather than treating it as an afterthought. We will tell you what we know and what we do not.

Documentation, Transit and Compliance

  • Import documentation. Alongside the commercial invoice, bill of lading, export documents and certificate of origin, shipments to Niger require the electronic cargo tracking note, and the import is handled by a licensed agent, with customs procedures conducted in French. Documentation has to be consistent across every file, because an inconsistency found in transit is expensive to fix.
  • Transit through third countries. Vehicles crossing Togo, Burkina Faso, Ghana, Nigeria or Benin move under transit procedures with their own requirements and guarantees. We coordinate with your transit agent so the vehicle moves under the right procedure. Note that Niger’s regional trade arrangements have changed in recent years, which affects transit and tariff treatment, so we verify the current position with your agent before you commit.
  • Export compliance. We check every order against the applicable European export rules, including the destination, the buyer and the end user. For international organisations, NGOs and contractors working to institutional standards, we are used to providing the documentation their own compliance teams require.
oilgas-man-18-250-4x4-service-truck-1

How We Arrange Your Purchase from A to Z

Step 1: Consultation and Programme Review

We discuss who you are supplying and how many people, your distances and the condition of the last few kilometres, your filling points and water analysis, your treatment protocol, your maintenance capacity and the standards your organisation or funder applies. As your sparring partner, we tell you where a larger vehicle will not arrive, and where a general purpose tanker would compromise the water quality you are responsible for.

Step 2: Selection and Configuration

We select suitable 4x4 and 6x6 chassis from our stock or through our European network and specify the tank and equipment with our bodybuilders, to a potable water specification. You receive a clear proposal with specifications, certification, pricing and planning, including a recommended spare parts package.

Step 3: Bodywork and Technical Preparation

The tank, pump and distribution system are built and mounted by specialised European bodybuilders, following the chassis manufacturer’s guidelines, with potable water lining and fittings, baffling and the protection specified for heat and sand. We oversee quality and planning and can share progress photos or arrange an inspection before shipment.

Step 4: Documentation, Compliance and Transit

We prepare the export declaration and shipping documents and supply the vehicle documents, the European Certificate of Conformity and the potable water certification for the tank and lining. We arrange the cargo tracking note, check the order against the applicable export rules and coordinate with your agent and transit partners so the documentation matches the route.

Step 5: Shipping, Delivery and Training

We arrange shipping to the agreed port and coordinate the onward transit with experienced partners. On delivery we can arrange training for your drivers and mechanics, covering both the vehicle and the cleaning and hygiene regime, which on a drinking water tanker is what keeps the vehicle doing its job safely.

Running a Water Supply Programme in Niger?

Tell us who you are supplying, how far you are driving and where you fill. Our specialists will advise you personally and prepare a clear proposal including certification and delivery, with no obligation.



Robert Brand

Sales Executive

Tel: + 31 (0) 6 39 32 28 00

r.brand@schaften.com

Frequently Asked Questions About Water Trucks for Sale in Niger

  • We supply 4x4 and 6x6 water tankers on chassis from Mercedes-Benz, MAN, IVECO and other leading European brands, including the Zetros, the Arocs, the MAN TGM and TGS and the IVECO T-Way and Eurocargo 4x4, with tanks built to a potable water specification by specialised European bodybuilders. We specify capacity, tank material and lining, baffling, pump and distribution equipment around your programme, and we also supply the rest of the fleet from cargo trucks and workshop vehicles to fuel trucks and refrigerated vehicles.

  • Almost everything that matters. The tank material and internal lining have to be suitable for potable water and certified as such. The filling points need to be sealed and screened, because contamination usually enters there rather than at the tap. The hoses and fittings have to be food grade throughout, including on the filling side. The tank needs an access hatch large enough to clean through and drainage that empties it completely, since standing water in this climate is a problem within days. And the vehicle has to be used for nothing else, because a tanker that has carried anything other than drinking water is no longer a drinking water tanker whatever you clean it with. We build to that specification and supply the certification with it.

  • It depends on whether your constraint is access or volume. A compact 4x4 reaches villages a larger vehicle cannot: narrow tracks, tight turns, informal crossings and soft sand all favour it, and where the job is reaching many small communities it is the right answer and costs less. A 6x6 carries more water further, which matters for larger settlements, displacement sites or long round trips from your filling point, and the traction keeps it moving in deep sand where a loaded 4x4 would struggle. Most programmes end up with a mix, and we will tell you plainly where a bigger truck will simply not arrive.

  • Usually smaller than the chassis could legally carry. In soft sand a fully loaded tanker is an immobilisation waiting to happen, and a vehicle that bogs down with a village waiting has failed at the only thing it was bought to do. We size the tank to your ground conditions, your distances and the demand at each site, balancing the water you need per run against the mobility you need to complete it. We would rather sell you the tank that arrives than the biggest one that fits

  • Yes, in two ways. Water with a high dissolved mineral content attacks a tank from the inside, so the material and lining have to be chosen for your water rather than for a catalogue, and the pump specification follows from the same analysis. It also affects what treatment your protocol requires before water is distributed, which may mean dosing or filtration provision on the vehicle. Send us your water analysis and we will specify around it. It is the decision most likely to determine whether the vehicle is still doing its job in ten years.

  • By sea to a West African port and then by road under transit, with Lomé, Cotonou and Tema as the main options and the routing depending on conditions and border status at the time of shipment. We plan that with our transit partners per shipment rather than promising one route in advance, because the situation on these corridors has changed repeatedly in recent years. Transit times are measured in weeks. For the import you will need a commercial invoice, a bill of lading, export documents, a certificate of origin, the vehicle documentation and the electronic cargo tracking note, with clearance handled by a licensed agent in French. We coordinate the transit documentation and keep you informed at each stage.